. MAKING A SIMPLE DYNAMO
NSAS
NSAS


Dynamo is a word that used to simply mean an electric generator, but today a dynamo refers to a generator which produces direct current (DC) using a commutator, an electrical switch that generates electricity from the force of a rotating rod.

A dynamo is one of the simplest and earliest electrical generators, and the first used to generate power for industry.


THINGS NEEDED IN DOING THE DYNAMO
  1. COPPER WIRE

  2. TUBE (PAPER,PIPE etc)

  3. MAGNET

  4. LED (LIGHT EMITTING DIODE)


PROCEDURAL IN DOING IT
  1. GET YOUR TUBE AND YOUR WIRE.
  2. COIL THE WIRE AROUND THE TUBE FOR ABOUT 200 ROUNDS BECAUSE,A LITTLE COIL GIVE A LITTLE VOLTS AND MANY COILS WILL GIVE YOU MANY VOLTS.AND THIS ONE REQUIRE MUCH COILING BEFORE IT CAN LIGHT THE LED.
  3. COVER ONE END OF THE TUBE.
  4. PUT YOUR MAGNET INTO THE TUBE.
  5. THEN COVER THE OTHER END OF THE TUBE.
  6. PILE OFF THE GALVANIZED ON THE END PART OF THE OF THE WIRE.
  7. CONNECT THE END OF THE PILED WIRE TO THE LED
  8. THEN YOU SHAKE THE DYNAMO FOR THE MAGNET TO CREATE A MAGNETIC FIELD WHICH WILL PUSH THE CURRENT IN THE WIRE TO LIGHT THE LED.


ADVANTAGE OF THIS DYNAMO

  1. IT IS EASY TO DO IT.
  2. IT IS NOT EXPENSIVE.
  3. IT DOES NOT REQUIRE ANY MACHINE FOR IT.

DISADVANTAGE OF THIS DYNAMO

  1. IT REQUIRES MUCH ENERGY IN DOING THIS TYPE OF DYNAMO, BECAUSE YOU HAVE TO SHAKE IT FOR THE MAGNET TO CREATE A MAGNETIC FIELD TO PRODUCE THE POWER TO LIGHT THE LE

  2. IT TAKES A LOT OF WIRES, BECAUSE YOU HAVE COIL A LOT OF WIRES AROUND THE TUBE.


THE PURPOSE OF DOING THE DYNAMO

WE WORK ON THIS THING BECAUSE WE WANT TO KNOWNMaking a Dynamo HOW THE DYNAMO WORKS IN DIFFERENT WAYS AND DIFFERENT METHOD


PLANNING

WE WERE THINKING OF



PROJECT NAME

MAKING A DYNAMO



include photos/diagrams if possible!

Reflection


how did it all turn out?