from instructables
from instructables
On a day was searching at the instrutables of which i came about a wind turbine which was made by a person.
So i decided to make one myself. But am finding it difficult to make it. This is because some materials that are
used to make the project are difficult to get. And also am trying harder to make it by using some different
material that can perform that function.


ITEMS NEEDED

  • COPPER WIRE
  • MAGNETS
  • PIPE / TUBE (PVC)
  • BEARINGS
  • BOLT AND NUT

SOME INTRODUCTION BY THE PERSON WHO MADE IT (/www.instructables.com/id/DIY-1000-watt-wind-turbine/ )


We built a 1000 watt wind turbine to help charge the battery bank that powers our off grid home. It's a permanent magnet alternator, generating 3 phase ac, rectified to DC, and fed to a charge controller. The magnets spin with the wind, the coils are fixed, so no brushes or slip rings necessary.

STEPS TO FELLOW